sccs-get(1)

NAME
sccs-get, get - retrieve a version of an SCCS file

SYNOPSIS

/usr/ccs/bin/get [-begkmnopst] [-l [p]] [-asequence]
    [-c date-time | -cdate-time] [-Gg-file]
    [-i sid-list | -isid-list] [-r [sid]]
    [-x sid-list | -xsid-list] s.filename...

/usr/xpg4/bin/get [-begkmnopst] [-l [p]] [-asequence]
    [-c date-time | -cdate-time] [-Gg-file]
    [-i sid-list | -isid-list] [-r sid | -rsid]
    [-x sid-list | -xsid-list] s.filename...

DESCRIPTION

The get utility retrieves a working copy from the SCCS history file, according to the specified options.

For each s.filename argument, get displays the SCCS delta ID (SID) and number of lines retrieved.

If a directory name is used in place of the s.filename argument, the get command applies to all s.files in that directory. Unreadable s.files produce an error; processing continues with the next file (if any). The use of `-' as the s.filename argument indicates that the names of files are to be read from the standard input, one s.file per line.

The retrieved file normally has the same filename base as the s.file, less the prefix, and is referred to as the g-file.

For each file processed, get responds (on the standard output) with the SID being accessed, and with the number of lines retrieved from the s.file.

OPTIONS

The following options are supported:

-asequence
    Retrieves the version corresponding to the indicated delta sequence number. This option is used primarily by the SCCS comb command (see sccs-comb(1)). For users, -r is an easier way to specify a version. The -a option supersedes the -r option when both are used.

-b  Creates a new branch. Used with the -e option to indicate that the new delta should have a SID in a new branch. Instead of incrementing the level for version to be checked in, get indicates in the p.file that the delta to be checked in should either initialize a new branch and sequence (if there is no existing branch at the current level), or increment the branch component of the SID. If the b flag is not set in the s.file, this option is ignored.

-c date-time

-cdate-time
    Retrieves the latest version checked in prior to the date and time indicated by the date-time argument. date-time takes the form:

     yy[mm[dd[ hh[mm[ss]]]]]

    Units omitted from the indicated date and time default to their maximum possible values; that is -c7502 is equivalent to -c750228235959. Values of yy in the range 69-99 refer to the twentieth century. Values in the range 00-68 refer to the twenty-first century. Any number of non-numeric characters may separate the various 2 digit components. If white-space characters occur, the date-time specification must be quoted.

    A date-time specification in the form:

     yyyy/[mm[dd[hh[mm[ss]]]]]

    refers to a 4-digit year and allows to specify a year outside the range 1969-2068.

-e  Retrieves a version for editing. With this option, get places a lock on the s.file, so that no one else can check in changes to the version you have checked out. If the j flag is set in the s.file, the lock is advisory: get issues a warning message. Concurrent use of `get -e' for different SIDs is allowed. However, get will not check out a version of the file if a writable version is present in the directory. All SCCS file protections stored in the s.file, including the release ceiling, floor, and authorized user list, are honored by `get -e'.

-g  Gets the SCCS version ID, without retrieving the version itself. Used to verify the existence of a particular SID.

-Gnewname
    Uses newname as the name of the retrieved version.

-i sid-list

-isid-list
    Specifies a list of deltas to include in the retrieved version. The included deltas are noted in the standard output message. sid-list is a comma-separated list of SIDs. To specify a range of deltas, use a `-' separator instead of a comma, between two SIDs in the list.

-k  Suppresses expansion of ID keywords. -k is implied by the -e.

-l[p]
    Retrieves a summary of the delta table (version log) and write it to a listing file, with the `l.' prefix (called `l.file'). When -lp is used, write the summary onto the standard output.

-L  Treated as if -lp was given.

-m  Precedes each retrieved line with the SID of the delta in which it was added to the file. The SID is separated from the line with a TAB.

-n  Precedes each line with the %M% ID keyword and a TAB. When both the -m and -n options are used, the ID keyword precedes the SID, and the line of text.

-o  Retrieves the file under the original time of the requested version.

    Use this option with care, as it may be in conflict with make(1) rules. Using `get -o' thus may cause make to perform an automatic retrival of the latest version as the s.file is newer than the gotten file, or cause make to skip the compilation as the compilation result is already newer than the gotten file.

    This option is a SCHILY extension that does not exist in historic sccs implementations.

-p  Writes the text of the retrieved version to the standard output. All messages that normally go to the standard output are written to the standard error instead.

-s  Suppresses all output normally written on the standard output. However, fatal error messages (which always go to the standard error) remain unaffected.

-t  Retrieves the most recently created (top) delta in a given release (for example: -r1).

-Cdir
    Specify the base directory for the g-file relative to the current working directory. By default, the g-file is created in the current directory (independent from the location of the s.file.

-V  Prints the get version number string and exists.

  /usr/ccs/bin/get

-d  Do not print the number of gotten lines.

    This option is an undocumented SUN extension that does not exist in historic sccs implementations.

-r[sid]
    Retrieves the version corresponding to the indicated SID (delta).

    The SID for a given delta is a number, in Dewey decimal format, composed of two or four fields: the release and level fields, and for branch deltas, the branch and sequence fields. For instance, if 1.2 is the SID, 1 is the release, and 2 is the level number. If 1.2.3.4 is the SID, 3 is the branch and 4 is the sequence number.

    You need not specify the entire SID to retrieve a version with get. When you omit -r altogether, or when you omit both release and level, get normally retrieves the highest release and level. If the d flag is set to an SID in the s.file and you omit the SID, get retrieves the default version indicated by that flag.

    When you specify a release but omit the level, get retrieves the highest level in that release. If that release does not exist, get retrieves highest level from the next-highest existing release.

    Similarly with branches, if you specify a release, level and branch, get retrieves the highest sequence in that branch.

-x sid-list

-x[sid-list]
    Excludes the indicated deltas from the retrieved version. The excluded deltas are noted in the standard output message. sid-list is a comma-separated list of SIDs. To specify a range of deltas, use a `-' separator instead of a comma, between two SIDs in the list.

  /usr/xpg4/bin/get

-r sid

-rsid
    Same as for /usr/ccs/bin/get except that SID is mandatory.

-x sid-list

-xsid-list
    Same as for /usr/ccs/bin/get except that sid-list is mandatory.

OUTPUT

  /usr/ccs/bin/get

The output format for /usr/ccs/bin/get is as follows:

"%s\n%d lines\n", <SID>, <number of lines>

  /usr/xpg4/bin/get

The output format for /usr/xpg4/bin/get is as follows:

"%s\n%d\n", <SID>, <number of lines>

USAGE

Usage guidelines are as follows:

  ID Keywords

In the absence of -e or -k, get expands the following ID keywords by replacing them with the indicated values in the text of the retrieved source.

T}
%D%Current date: yy/mm/dd
%d%Current date: yyyy/mm/dd
%E%T{
Date newest applied delta was created: yy/mm/dd
T}
%e%T{
Date newest applied delta was created: yyyy/mm/dd
T}
%F%SCCS s.file name
%G%T{
Date newest applied delta was created: mm/dd/yy
T}
%g%T{
Date newest applied delta was created: mm/dd/yyyy
T}
%H%Current date: mm/dd/yy
%h%Current date: mm/dd/yyyy
%I%SID of the retrieved version: %R%.%L%.%B%.%S%
%L%SID level component
%M%T{
Module name: either the value of the m flag in the s.file (see
sccs-admin(1)), or the name of the s.file less the prefix
T}
%P%
%Q%Value of the q flag in the s.file
%R%SID Release component
%S%SID Sequence component
%T%Current time: hh:mm:ss
%U%T{
Time the newest applied delta was created: hh:mm:ss
T}
%W%T{
Shorthand notation for an ID line with data for what: %Z%%M% %I%
T}
%Y%T{
Module type: value of the t flag in the s.file
T}
%Z%T{
4-character string: `@(#)', recognized by what
T}

A line with a string in the form %sccs.include.filename% is replaced by the content of the file filename. The file is searched for in the path list found in the environment variable SCCS_INCLUDEPATH.

The keywords %d%, %e%, %g% and %h% are only expanded if either the `x' flag has been set by the admin(1) command or if the expansion for a specific keyword has been enabled via the `y' flag.

  ID String

The table below explains how the SCCS identification string is determined for retrieving and creating deltas.

(1)
    `R', `L', `B', and `S' are the `release', `level', `branch', and `sequence' components of the SID, respectively; `m' means `maximum'. Thus, for example, `R.mL' means `the maximum level number within release R'; `R.L.(mB+1).1' means `the first sequence number on the new branch (that is, maximum branch number plus one) of level L within release R'. Note: If the SID specified is of the form `R.L', `R.L.B', or `R.L.B.S', each of the specified components must exist.

(2)
    The -b option is effective only if the b flag is present in the file. An entry of `-' means `irrelevant'.

(3)
    This case applies if the d (default SID) flag is not present in the file. If the d flag is present in the file, the SID obtained from the d flag is interpreted as if it had been specified on the command line. Thus, one of the other cases in this table applies.

(4)
    Forces creation of the first delta in a new release.

(5)
    `hR' is the highest existing release that is lower than the specified, nonexistent, release R.

(6)
    Successor.

ENVIRONMENT VARIABLES

See environ(5) for descriptions of the following environment variables that affect the execution of get: LANG, LC_ALL, LC_COLLATE, LC_CTYPE, LC_MESSAGES, and NLSPATH.

SCCS_INCLUDEPATH
    A colon separated list of directories where to look for include files for a %sccs.include.filename% replacement.

FILES

``g-file''
    version retrieved by get

l.file
    file containing extracted delta table info

p.file
    permissions (lock) file for checked-out versions

q.file
    temporary copy of the p.file; renamed to the p.file after completion

z.file
    temporary lock file contains the binary process id in host byte order followed by the host name

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

  /usr/ccs/bin/get

  /usr/xpg4/bin/get

SEE ALSO

sccs(1), sccs-admin(1), sccs-cdc(1), sccs-comb(1) sccs-delta(1), sccs-help(1), sccs-prs(1), sccs-prt(1), sccs-rmdel(1), sccs-sact(1), sccs-sccsdiff(1), sccs-unget(1), sccs-val(1), sccscvt(1), sccslog(1), bdiff(1), diff(1), what(1), sccsfile(4), attributes(5), environ(5), standards(5).

DIAGNOSTICS

Use the SCCS help command for explanations (see sccs-help(1)).

BUGS

If the effective user has write permission (either explicitly or implicitly) in the directory containing the SCCS files, but the real user does not, only one file may be named when using -e.