sccs-branch(1)

NAME
sccs-branch - create a new branch and retrieve a version for editing

SYNOPSIS
sccs branch [options] [file1 .. filen]

DESCRIPTION

The branch subcommand creates a new branch and retrieve a version for editing. Except for creating a new branch, this is equivalent to the edit subcommand.

sccs branch is equivalent to ``get -b -e'' followed by ``delta -s -n'' followed by ``get -e -t -g''.

OPTIONS

-asequence
    Retrieves the version corresponding to the indicated delta sequence number. This option is used primarily by the SCCS comb command (see sccs-comb(1)). For users, -r is an easier way to specify a version. The -a option supersedes the -r option when both are used.

-c date-time

-cdate-time
    Retrieves the latest version checked in prior to the date and time indicated by the date-time argument. date-time takes the form:

     yy[mm[dd[ hh[mm[ss]]]]]

    Units omitted from the indicated date and time default to their maximum possible values; that is -c7502 is equivalent to -c750228235959. Values of yy in the range 69-99 refer to the twentieth century. Values in the range 00-68 refer to the twenty-first century. Any number of non-numeric characters may separate the various 2 digit components. If white-space characters occur, the date-time specification must be quoted.

    A date-time specification in the form:

     yyyy/[mm[dd[hh[mm[ss]]]]]

    refers to a 4-digit year and allows one to specify a year outside the range 1969-2068.

-i sid-list

-isid-list
    Specifies a list of deltas to include in the retrieved version. The included deltas are noted in the standard output message. sid-list is a comma-separated list of SIDs. To specify a range of deltas, use a `-' separator instead of a comma, between two SIDs in the list.

-l  Retrieve a summary of the delta table as l.file.

-p  Writes the retrieved version to stdout.

-s  Suppresses all output normally written on the standard output. However, fatal error messages (which always go to the standard error) remain unaffected.

-r[sid]
    Retrieves the version corresponding to the indicated SID (delta).

    The SID for a given delta is a number, in Dewey decimal format, composed of two or four fields: the release and level fields, and for branch deltas, the branch and sequence fields. For instance, if 1.2 is the SID, 1 is the release, and 2 is the level number. If 1.2.3.4 is the SID, 3 is the branch and 4 is the sequence number.

    You need not specify the entire SID to retrieve a version with get. When you omit -r altogether, or when you omit both release and level, get normally retrieves the highest release and level. If the d flag is set to an SID in the s.file and you omit the SID, get retrieves the default version indicated by that flag.

    When you specify a release but omit the level, get retrieves the highest level in that release. If that release does not exist, get retrieves highest level from the next-highest existing release.

    Similarly with branches, if you specify a release, level and branch, get retrieves the highest sequence in that branch.

-x sid-list

-x[sid-list]
    Excludes the indicated deltas from the retrieved version. The excluded deltas are noted in the standard output message. sid-list is a comma-separated list of SIDs. To specify a range of deltas, use a `-' separator instead of a comma, between two SIDs in the list.

EXAMPLES

To create a new branch for the file xec.c in the current directory, call:

    sccs branch xec.c

ENVIRONMENT VARIABLES

See environ(7) for descriptions of the following environment variables that affect the execution of sccs-branch(1): LANG, LC_ALL, LC_CTYPE, LC_MESSAGES, and NLSPATH.

SCCS_NO_HELP
    If set, sccs branch will not automatically call help(1) with the SCCS error code in order to print a more helpful error message. Scripts that depend on the exact error messages of SCCS commands should set the environment variable SCCS_NO_HELP and set LC_ALL=C.

ATTRIBUTES

See attributes(7) for descriptions of the following attributes:

SEE ALSO

sccs(1), sccs-add(1), sccs-admin(1), sccs-cdc(1), sccs-check(1), sccs-clean(1), sccs-comb(1), sccs-commit(1), sccs-create(1), sccs-cvt(1), sccs-deledit(1), sccs-delget(1), sccs-delta(1), sccs-diffs(1), sccs-edit(1), sccs-editor(1), sccs-enter(1), sccs-fix(1), sccs-get(1), sccs-help(1), sccs-histfile(1), sccs-info(1), sccs-init(1), sccs-istext(1), sccs-ldiffs(1), sccs-log(1), sccs-print(1), sccs-prs(1), sccs-prt(1), sccs-rcs2sccs(1), sccs-remove(1), sccs-rename(1), sccs-rmdel(1), sccs-root(1), sccs-sact(1), sccs-sccsdiff(1), sccs-status(1), sccs-tell(1), sccs-unedit(1), sccs-unget(1), sccs-val(1), what(1), sccschangeset(5), sccsfile(5).

BUGS

None currently known.

Mail bugs and suggestions to schilytools@mlists.in-berlin.de or open a ticket at https://codeberg.org/schilytools/schilytools/issues.

The mailing list archive may be found at:

https://mlists.in-berlin.de/mailman/listinfo/schilytools-mlists.in-berlin.de.

AUTHORS
sccs was originally written by Eric Allman at UCB in 1980. It was later maintained by various people at AT&T and Sun Microsystems. Since 2006, it has been maintained by Joerg Schilling and the schilytools project authors.

SOURCE DOWNLOAD
The source code for sccs is included in the schilytools project and may be retrieved from the schilytools project at Codeberg at

https://codeberg.org/schilytools/schilytools.

The download directory is

https://codeberg.org/schilytools/schilytools/releases.